MPS Plus Solar Inverter
Features:
- Pure sine wave inverter
- Built-in MPPT solar charge controller
- High efficiency pure sine wave inverter(PF=1);
- Selectable input voltage range for home appliances and personal computers
- Selectable charging current based on applications
- Configurable AC/Solar input priority via LCD setting
- Compatible to mains voltage or genrator power
- Auto restart while AC is recovering
- Overload and short circuit circuit protection
- Smart battery charger design for opfimized battery performance
- Cold start function
- Parallel operation with up to 9 units onits available for MKS 4K/5K
Introduction:
Equipped with MPPT solar charge controller to maximize andregulate DC power from the solar array for the charging the batterybank. Transformer-less design provides reliable power conversion in compact sizeand with high efficiency. With aluminum housing, Integrated interface system, It’s light and handy, making installation easier. It’s the ideal inverters forsmall PV plants, or individually for small
houses, both indoors and outdoors.
Solar System Connection
LCD Display Information
- led display
- status indicator
- charging indicator
- fault indicator
- funtion buttons
- power on/off switch
- Ac input
- AC output
- Battery input
- Circuit breaker
- RS232 Communication
- Parallel communication cable (only for parallel model )
- Current sharing cable (only for parallel model )
- Dry contact
- USB communication port
Prowess MPS Plus Inverter Selection Guide
Model | MPS PLUS 5KVA-80 |
---|---|
Rated Power | 5000VA/5000W |
INPUT | |
Voltage | 230 VAC |
Selectable Voltage Range | 170-280 VAC (For Personal Computers) 90-280 VAC (For Home Appliances) |
Frequency Range | 50 Hz/60 Hz (Auto sensing) |
OUTPUT | |
AC Voltage Regulation (Batt. Mode) | 230VAC ± 5% |
Surge Power | 10000VA |
Efficiency(Peak) | 93% |
Transfer Time | 10 ms (For Personal Computers) 20 ms (For Home Appliances) |
Waveform | Pure sine wave |
BATTERY & AC CHARGER | |
Battery Voltage | 48 VDC |
Floating Charge Voltage | 54 VDC |
Overcharge Protection | 60 VDC |
Maximum Charge Current | 10A/ 20A/30A/40A/50A/60A |
SOLAR CHARGER(OPTION) | |
Maximum PV Array | 4000W |
MPPT Range @ Operating Voltage | 60 VDC~115 VDC |
Maximum PV Array Open Circuit Voltage | 145 VDC |
Maximum Charging Current | 60A/80A |
Maximum Efficiency | 98% |
Standby Pwer Consumption | 2W |
PHYSICAL | |
Dimension, D x W x H (mm) | 387*300*118 |
Net Weight (kgs) | 10.5 |
OPERATING ENVIRONMENT | |
Humidity | 5% to 95% Relative Humidity(Non-condensing) |
Operating Temperature | 0° С - 55° с |
Storage Temperature | -15° C -60° C |
Product specification are subject to change without further notice | |
Model | MPS 5K |
İnverter power | 5000W |
Pmax. generated from solar charger | 80Amp 4000W |
Best Panel Configuration | 3000Wp (250Wp*16pcs ) |